







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Santa Clarita, CA
A bathroom vanity, tile installation, or fixture swap in Santa Clarita typically runs $1,200 to $9,500 depending on scope, and most single-item jobs are finished in one to three days. This is the work that changes how a bathroom feels and functions: a vanity that finally fits the space, tile that holds up to daily use, and fixtures that don’t drip, wobble, or fight you every morning. We handle vanities, tile, and fixtures as part of our Bathroom Remodeling service, which means one crew, one written price, and one guarantee covering the whole job.
Not every bathroom needs a full remodel. A lot of the calls we take in Santa Clarita start with something narrower: a cracked tile field around the shower pan, a vanity cabinet swollen from a slow leak, a faucet that’s been dripping since spring. You can put a number on that work before anyone touches a tool, and you should. Call (866) 383-6693 and we’ll give you a written price and a real arrival window before work starts.
Key Takeaways
- Vanity replacements in Santa Clarita usually run $1,200 to $3,800 installed, depending on the cabinet line and countertop material.
- Tile work is priced by the square foot plus substrate and waterproofing, and the waterproofing is where cheap jobs fail first.
- Fixture swaps (faucets, shower valves, toilets) carry a supply-line and valve inspection most one-off installers skip.
- Every job gets a written price up front and our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and fix it at no charge.

When You Need Vanities, Tile & Fixtures
These are the scenarios we see most often in Santa Clarita homes, and each one points to a specific fix rather than a guess:
- Cracked or hollow-sounding floor tile. In older Santa Clarita homes, a tile that sounds hollow underfoot usually means the thin-set bond broke loose, not that the tile itself failed. Reset it now and the floor holds. Ignore it and water finds the gap.
- A vanity that’s pulling away from the wall or swollen at the base. Particleboard cabinets don’t recover from moisture. If the toe kick is soft or the cabinet has separated from the drywall, the leak that caused it is still active somewhere behind the wall.
- Grout lines that crumble and darken within weeks of cleaning. Crumbling grout in a wet area is a sign the original installation missed proper waterproofing. Re-grouting over it buys you a season at best.
- Shower valves that only deliver hot, only cold, or a weak stream. Santa Clarita’s water runs hard, and mineral scale builds up in older cartridges. A valve swap fixes it, but the wall behind it needs to be opened, inspected, and closed properly.
- You’re selling or updating before a move. A vanity, tile, and fixture refresh is the highest-return cosmetic work in a bathroom, and buyers in the Santa Clarita market notice a dated vanity first.
- Your fixtures are original to a 1980s or 1990s build. Faucets, supply lines, and shutoff valves from that era are at the end of their service life. Replacing them now is far cheaper than the water damage a failed supply line causes.
Our Vanities, Tile & Fixtures Process
Here’s how this work actually runs, start to finish:
- Walkthrough and written price. We look at the existing vanity, check the shutoff valves, tap the floor tile, and note what’s behind the shower wall where we can see it. Then you get a written number before any work starts. Not a range, not a verbal estimate that changes at the door.
- Demo and substrate inspection. We pull the old vanity, tile, and fixtures and look at the substrate (the layer of material under your finished surface). Cement board and waterproofing membrane are what keep tile from failing. If the original install skipped them, that’s where the money goes, and we’ll show you why.
- Rough-in and valve check. We confirm the supply lines, drain, and shower valve are sound before closing anything up. A new vanity and new tile over a failing valve is a job you’ll pay for twice.
- Installation. Vanity cabinet set and leveled, countertop templated and fitted, tile set and grouted, fixtures installed and tested. We use recognized trade brands – KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone counters, Kohler and Moen fixtures – because the products behind the guarantee matter as much as the promise.
- Testing and walkthrough. Every valve, drain, and supply line gets run and checked before we call it done. We walk you through what we installed and hand over the written guarantee.
The standard we work to is The Kingswell Way: say the price before the work, show up in the window we gave you, and leave the place cleaner than we found it. Every technician is background-checked and arrives in uniform, so you know exactly who is in your home. Our technicians have up to 22 years of experience, and that experience shows up most in the places you can’t see – the substrate prep, the valve check, the waterproofing detail behind the tile.

Vanities, Tile & Fixtures Pricing in Santa Clarita
Below are the ranges we quote most often for this work in Santa Clarita. Exact pricing depends on the size of your bathroom, the material you choose, and what we find once the old surface comes off.
| Item | Typical Range | What Drives the Number |
|---|---|---|
| Vanity replacement (48 – 72 inch, cabinet + top) | $1,200 – $3,800 | Cabinet line, counter material, plumbing relocation |
| Countertop only (quartz or solid surface) | $550 – $1,600 | Material, cutouts for sinks, edge profile |
| Floor tile installation | $8 – $18 per sq ft | Tile type, substrate repair, waterproofing |
| Shower wall tile (per sq ft) | $12 – $26 per sq ft | Waterproofing system, tile size, niche work |
| Faucet or fixture replacement | $180 – $450 each | Access, valve condition, brand and finish |
| Shower valve and trim swap | $450 – $1,100 | Wall access, drain work, valve brand |
| Toilet replacement (set and seal) | $320 – $700 | Flange condition, water line, model |
The honest cost drivers are material grade and what’s underneath the old finish. A tile floor with a sound substrate is a straightforward job. A tile floor over a failed membrane is a tile job plus prep plus waterproofing, and we’ll tell you that before we start, not after. Because tile sets over a cement board substrate that has to be moisture-sealed and installed to spec, we don’t skip or shortcut that step to hold a bid down. It’s the layer that makes the difference between a floor that lasts a couple of seasons and one that lasts decades.
We’re a general contractor serving homeowners who need kitchens, bathrooms, and whole-home remodels, and we source products from the trade brands we trust. That includes well-recognized lines like Cambria quartz, which carries its own manufacturer warranty alongside ours. We’re also part of the Kingswell family of companies, which has set the standard since 2004 – each location is independently owned and operated, but every one holds to the same written-price rule and the same guarantee.
Our pricing is no-hassle: you get a written price before work starts, and the number on day one is the number on the invoice. No surprise line items after demo. If you want a ballpark on a specific vanity or tile, call us and we’ll talk it through – the estimate is free.
What Brands Do You Install for Vanities, Tile & Fixtures?
We install vanities, tile, and fixtures from brands we know we can stand behind: KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler and Moen fixtures, and Delta, Toto, and Grohe options where a homeowner asks for them. On tile, the substrate and setting materials matter as much as the tile itself, so we use established mortar and waterproofing systems rather than the cheapest product on the shelf. If you’ve already picked out materials, bring them in and we’ll work with what you chose and make sure it’s installed to spec.
How Long Does Vanity and Tile Work Take in Santa Clarita?
A vanity swap or fixture replacement is usually a same-day or next-day job, and a tile floor or shower wall in a standard full bath takes three to six working days once the substrate is sound. The variable is what’s behind the old tile. If the waterproofing was done right the first time, we’re installing over a sound base. If it wasn’t, the prep adds time, but it’s the work that keeps the new tile from failing. We’ll give you a realistic schedule in writing with your price, and we hold to the arrival window we give you.
Do I Need a Permit for Bathroom Tile or a Vanity Swap in Santa Clarita?
True cosmetic swaps – painting, replacing a faucet, resetting a tile – generally don’t require a permit, but plumbing relocations, valve replacements that involve opening walls, and anything structural usually do. Santa Clarita permits are pulled through the city’s building division, and requirements vary by scope. We tell you up front whether your job needs a permit and handle the paperwork. Ask about this at the estimate – a contractor who waves off permitting on visible plumbing changes is a contractor who’s leaving you with the risk.
What’s in the 365-Day Done Right Promise?
The 365-Day Done Right Promise means that if the work fails within one year of completion, we come back and fix it at no charge. That covers a tile that comes loose, a valve that leaks, a vanity that shifts. Every job comes with this guarantee in writing, and it’s not a verbal promise – it’s on the paperwork. If something needs a second look, we return without a service call or re-inspection fee. It’s the reason we put as much care into the parts you can’t see as the parts you can.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity replacement cost in Santa Clarita?
Vanity replacement in Santa Clarita typically costs $1,200 to $3,800 for a 48 to 72 inch cabinet with counter and sink.
The low end covers a stock cabinet with a laminate or entry solid-surface top. The high end is a semi-custom line like KraftMaid or Wellborn with quartz from Cambria or Silestone and a relocated drain. Call (866) 383-6693 for a written price – the estimate is free and you’ll have a real number in writing before work starts.
Can you match new tile to my existing floor or shower?
Often, yes, but matching old tile is not always possible because dye lots, sizes, and finishes change over time. We’ll search for a close match and, where an exact match isn’t available, walk you through the options: a complementary tile with a clean transition line, or re-tiling the full field so the pattern reads as intentional. We’ll show you samples side by side before you commit, and we won’t install a patch that looks like a patch.
Is it cheaper to repair or replace a vanity?
It depends on the damage. Surface wear, a loose door, or a failing faucet is a repair and usually costs a few hundred dollars. Swelling, soft base material, or separation from the wall points to water damage and a replacement is the better call – patching a swollen cabinet just delays the failure. We’ll give you both numbers and tell you which one we’d pick in your house. Call (866) 383-6693 and we’ll take a look.
Can you do the vanity, tile, and fixtures all in one job?
Yes. That’s exactly what this page covers, and doing them together usually saves money because we open the wall once, protect the space once, and set the schedule around one crew. It also means one written guarantee covers the whole job rather than three contractors each pointing at the other when something goes wrong. If your bathroom is part of a larger project, we tie this in with Bathroom Remodeling.
Need a vanity, tile, or fixture handled right the first time? Call us at (866) 383-6693 for a free estimate. You’ll get a written price, a real arrival window, and the same guarantee we put on every job. We’re a live person on the line, day or night – no voicemail, no callback window. New to Penhallow? Start with our home page to see how we work.
Here’s how we think about this work
We’re a general contractor, and our people have done this work long enough to know where a bathroom fails. It fails under the tile, at the valve, and at the back of a cabinet where nobody looks. So that’s where we look first. We put the price and the guarantee in writing before we start, and we stand behind the work with a 365-day promise – if something goes wrong, we come back and fix it. If there’s a second visit needed, there’s no service call, no inspection fee. The result is a bathroom that works and a contractor you’d call again.
Written by the team at Penhallow Remodeling Santa Clarita, serving Santa Clarita.


